#include <string.h>#include <libopencm3/ethernet/mac.h>#include <libopencm3/ethernet/phy.h>#include <libopencm3/stm32/gpio.h>#include <libopencm3/cm3/nvic.h>
Include dependency graph for mac_stm32fxx7.c:
Go to the source code of this file.
Functions | |
| void | eth_set_mac (const uint8_t *mac) |
| Set MAC to the PHY. More... | |
| void | eth_desc_init (uint8_t *buf, uint32_t nTx, uint32_t nRx, uint32_t cTx, uint32_t cRx, bool isext) |
| Initialize buffers and descriptors. More... | |
| bool | eth_tx (uint8_t *ppkt, uint32_t n) |
| Transmit packet. More... | |
| bool | eth_rx (uint8_t *ppkt, uint32_t *len, uint32_t maxlen) |
| Receive packet. More... | |
| void | eth_start (void) |
| Start the Ethernet DMA processing. More... | |
| void | eth_init (uint8_t phy, enum eth_clk clock) |
| Initialize ethernet. More... | |
| void | eth_irq_enable (uint32_t reason) |
| Enable the Ethernet IRQ. More... | |
| void | eth_irq_disable (uint32_t reason) |
| Disable the Ethernet IRQ. More... | |
| bool | eth_irq_is_pending (uint32_t reason) |
| Check if IRQ is pending. More... | |
| bool | eth_irq_ack_pending (uint32_t reason) |
| Check if IRQ is pending, and acknowledge it. More... | |
| void | eth_enable_checksum_offload (void) |
| Enable checksum offload feature. More... | |
| static void | eth_smi_transact (void) |
| Process pending SMI transaction and wait to be done. More... | |
| void | eth_smi_write (uint8_t phy, uint8_t reg, uint16_t data) |
| Write 16-bit register to the PHY. More... | |
| uint16_t | eth_smi_read (uint8_t phy, uint8_t reg) |
| Read the 16-bit register from the PHY. More... | |
| void | eth_smi_bit_op (uint8_t phy, uint8_t reg, uint16_t bits, uint16_t mask) |
| Process the bit-operation on PHY register. More... | |
| void | eth_smi_bit_clear (uint8_t phy, uint8_t reg, uint16_t clearbits) |
| Clear bits in the register. More... | |
| void | eth_smi_bit_set (uint8_t phy, uint8_t reg, uint16_t setbits) |
| Set bits in the register. More... | |
Variables | |
| uint32_t | TxBD |
| uint32_t | RxBD |
